柴油發電機是一種小型發電設備，系指以柴油等為燃料，以柴油機為原動機帶動發電機發電的動力機械。整套機組一般由柴油機、發電機、控制箱、燃油箱、起動和控制用蓄電瓶、保護裝置、應急柜等部件組成?？捎糜诟鞣N家庭、辦公室、大中小型企業日常發電以及應急發電。   

溫度及壓力的控制在柴油機運行中非常關鍵，潤滑油壓力、燃油壓力不足，柴油機將無法運行。目前的大功率中速柴油機大都有一套比較完整的監控檢測系統，對柴油機的一些重要參數（如溫度、壓力等）進行監控，一旦這些參數超出設定范圍就聲光報警或自動停機。

　　柴油發電機組設有氣缸排氣、透平排氣、主軸承、發電機定子、缸套水、潤滑油等溫度監測及燃油、起動空氣、潤滑油、生水、缸套水、油嘴水、進氣等壓力監測。這些溫度及壓力監測、報警及安全停機系統主要由裝在控制屏上的CMR424、CMR524單元組成。

　　柴油機在運行中溫度傳感元件眾多，但大致可分為熱電阻（PT100）和熱電偶（Ni-Cr/Ni-Al)2種類型。通過熱電阻傳感器在溫度變化時阻值的變化和熱電偶傳感器在溫度變化時熱電勢的變化，將信號傳送到CMR424系統進行轉化、比較、打印、顯示并作用于報警或跳機。壓力的變送主要是通過現場的壓力變送器將信號傳送到CMR424系統進行轉化、比較、打印、顯示并作用于報警或跳機。

A diesel generator is a small power generation device that refers to a power machinery that uses diesel or other fuels and a diesel engine as the prime mover to drive the generator to generate electricity. The entire unit is generally composed of components such as a diesel engine, generator, control box, fuel tank, starting and control battery, protective device, emergency cabinet, etc. Can be used for daily power generation and emergency power generation in various households, offices, large, medium and small enterprises.

The control of temperature and pressure is crucial in the operation of diesel engines. Insufficient lubricating oil pressure and fuel pressure will prevent the diesel engine from running. At present, most high-power and medium speed diesel engines have a relatively complete monitoring and detection system that monitors some important parameters of the diesel engine, such as temperature, pressure, etc. Once these parameters exceed the set range, an audible and visual alarm or automatic shutdown will be triggered.

The diesel generator set is equipped with temperature monitoring for cylinder exhaust, turbine exhaust, main bearings, generator stator, cylinder liner water, lubricating oil, etc., as well as pressure monitoring for fuel, starting air, lubricating oil, raw water, cylinder liner water, nozzle water, intake, etc. These temperature and pressure monitoring, alarm, and safety shutdown systems are mainly composed of CMR424 and CMR524 units installed on the control screen.

There are many temperature sensing components in diesel engines during operation, but they can be roughly divided into two types: thermistor (PT100) and thermocouple (Ni Cr/Ni Al). The signals are transmitted to the CMR424 system for conversion, comparison, printing, display, and applied to alarm or trip by detecting the changes in resistance value of the thermal resistance sensor and the changes in thermoelectric potential of the thermocouple sensor during temperature changes. The transmission of pressure is mainly achieved by transmitting signals to the CMR424 system through on-site pressure transmitters for conversion, comparison, printing, display, and application to alarm or trip.